Tools Required:
3/16” Serrated Trowel, Tape Measure, Level, Straight Edge, Scissors
or Utility Knife, Small Brush to Smooth Mortar Joints.
Installation
is Easy!
You already
have the all the tools you need for this easy installation process.
1. Apply small amount of
the Flexi-Brick™ Mortar on a clean dry surface using 3/16 serrated
trowel. Always start on the top side of the wall. Work in an area
3 to 6 sq ft. at a time. Never apply Flexi-Brick™ at below 40
degrees Fahrenheit.
2. Embed the Flexi-Brick™
fully into the adhesive. Recommended joint size is 3/8" wide.
Smaller joint will require more bricks. Select bricks at random from
different cartons to achieve a uniform finished appearance.
3. Flexi-Brick™ can
easily be cut using scissors or sharp knife.
4. Flexi-Brick™ can
be applied around rounded corners and curved surfaces. be sure to
use special corner bricks for 90 degree angles.
5. Smooth the joints with
a damp paintbrush. Be sure that the Flexi-Brick™ is fully embedded
on all sides. Make sure that no moisture can penetrate behind already
applied bricks. In the case of an exterior application the surface
must be protected from rain for 5 to 7 days.
NOTE: Keep minimum distance
of 6 inches between Flexi-Brick™ and heat sources (furnaces,
open flames, etc.).
Flexi-Brick.
LLC
500 Elk Street
Buffalo, NY 14210
716-826-0078
email: info@flexibrick.com
